1. First, clean the surface thoroughly—ideally with water and a mild detergent to remove dust, grease, or dirt. Then dry thoroughly.

2. Place the sticker loosely in the desired location to see how it fits best. Before peeling it off, wipe the backing film once with a credit card, for example, to ensure everything sticks to the transfer film.

3. Once you're sure, carefully peel off the backing (the carrier film). Place it in the desired location and press the sticker on piece by piece – evenly and without pressure marks or bubbles.

4. If bubbles or wrinkles do form, you can use a soft card (e.g. credit card) or a squeegee to gently smooth them from the inside out until everything is smooth.

5. Leave the sticker alone after applying it. Ideally, let it stick for a few hours before moving the car or wiping it.

IMPORTANT:
When removing the backing film, the sticker must come off completely – so make sure nothing is left behind.
Even when removing the transfer film from the car or window, only the film should come off – the sticker itself remains attached. Tip: If the sticker doesn't completely come off, apply heat, e.g., rub it with your hands.

A notice:
We cannot provide compensation if something goes wrong during removal, so please work slowly and carefully.

We'll replace the product for you free of charge—just contact us with a photo!